Skip to main content

eXR password recover(asr9000/ncs6k)

·1 min
Rs
Table of Contents

This artical will introduction how to recover password in eXR system, Like ASR9000,NCS6008. You can reference below comment.

For ASR9000, you need connect to the AUX port;

For NCS6008, you can connect to the sysadmin vm port.

Recover steps
#

First you will see below output, use cisco/cisco login, as AUX and sysadmin port will skip AAA.

System Admin Username: cisco

Password: 
sysadmin-vm:0_RP0# 
sysadmin-vm:0_RP0# show VM
Tue Jun  4  18:46:44.342 UTC
Location: 0/RP0
Id                Status        IP Address       HB Sent/Recv
-------------------------------------------------------------
sysadmin          running       192.0.0.1        NA/NA
default-sdr       running       192.0.0.4        1733/1733    <<<< XR vm linux kernel
sysadmin-vm:0_RP0# run
[sysadmin-vm:0_RP0:~]$chvrf 0 bash     <<< must be exec this command 
[sysadmin-vm:0_RP0:~]$ssh 192.0.0.4
[xr-vm_node0_RP0_CPU0:~]$
[xr-vm_node0_RP0_CPU0:~]$
[xr-vm_node0_RP0_CPU0:~]$
[xr-vm_node0_RP0_CPU0:~]$config    <<<<
RP/0/RP0/CPU0:NCS6008-A(config)#
RP/0/RP0/CPU0:NCS6008-A(config)#   <<< Then you can modify the configuration



Comments